EDAC Electronics Ltd. EDAC700 RTU Technical Reference Manual page 56

The Alpha paging or SMS message has a number after the text, what is it?
If you have configured an analogue input, and when it is triggered it reports to a
pager or cell phone text message then the current analogue reading is added to
the end of the message. Your pager message needs to reflect that this reading will
be added on.
Example: Use pager messaging entry like this "High WL Alarm, the reading is: "
On alarm notification call the text message might be "High WL Alarm, the reading
is: 12.3".
Data Base Repair "ERROR: db repair" what does this mean?
Due to the EDAC700 RTU being a computer-based product, it is possible for it to
occasionally get its memory scrambled. If this should happen it will report that the
database has been repaired while re-booting. In most cases the EDAC700 RTU
will be fine, however you should consider using the "Erase Config" option from the
"Configure misc" menu if this should happen. If you don't use this option you
should test that your configuration is working correctly.
You should also use "Erase Config" after an Operating System upgrade, to ensure
that all parameters line up correctly.
Date: 31/10/12 Page 56File: 700b Technical Manual ver1.9.3.docm