Danfoss AKD 5001 Manual page 8

2. Electrical Installation, power
NOTE: The terminals are detachable on AKD 5001-5006, 200-240 V and AKD 5001-5011, 380-500 V
Connect the mains supply to the mains terminals L1, L2, L3 of the frequency converter and to the earth
connection (fig. 5-8). Cable relief fitting is placed on the wall for Bookstyle units. Mount screened motor
cable to the motor terminals U, V, W, PE of the frequency converter. Make sure, the screen is connected
electrically to the drive.
Fig. 6
Compact IP 20 and IP 54
5001 - 5011 380 - 500 V
5001 - 5006 200 - 240 V
MG.50.R3.02 -
AKD 5000
Fig. 7
Compact IP 20
5016 - 5062 380 - 500 V
5008 - 5027 200 - 240 V
7