Danfoss AKD 5001 Manual page 37

NB!:
The RFI switch disconnects the capacitors
galvanically to ground.
The red switches are operated by means of e.g. a
screwdriver. They are set in the OFF position when
they are pulled out and in ON position when they are
pushed in (see drawing below). Factory setting is ON.
Mains supply connected to earth:
The RFI switch must be in ON position in order for the
frequency converter to comply with the EMC-standard.
Position of RFI switches
Compact IP 20/NEMA 1
AKD 5001 - 5006 200 - 240 V
AKD 5001 - 5011 380 - 500 V
36
AKD 5000
Compact IP 20/NEMA 1
AKD 5008 200 - 240 V
AKD 5016 - 5022 380 - 500 V
Compact IP 20/NEMA 1
AKD 5011 - 5016 200 - 240 V
AKD 5027 - 5032 380 - 500 V
MG.50.R3.02 -