Danfoss AKD 5001 Manual page 65

018 Lock for data change
(DATA CHANGE LOCK)
Value:
Not locked (NOT LOCKED)
Locked (LOCKED)
Function:
In this parameter, the software can "lock" the
control, which means that data changes cannot
be made via LCP (however, this is still possible
via the serial communication port).
Description of choice:
If Locked [1] is selected, data changes cannot be made.
= factory setting. () = display text [] = value for use in communication via serial communication port
64
AKD 5000
[0]
[1]
MG.50.R3.02 -