2
Overview
Terminal Settings
Avaya P550R/P580/P880/P882 MultiService Switch Installation Guide, v5.3
Initial Configuration
This chapter provides the following initial configuration
information that is pertinent to both layer 2 and layer 3 modules:
Terminal Settings
■
Initial Configuration of the Supervisor Module
■
Changing Modes
■
To complete initial switch setup, you need a PC or video terminal
with a connection to the serial port on the supervisor module.
Refer to
Table 2-1
communicate with the switch.
Baud Rate
Stop Bits
9,600
1
for the required terminal settings to
Table 2-1. Terminal Settings
Data Bits
8
Flow
Parity
Control
Xon/Xoff
None
2-1