Phone Lock - Yealink SIP-T46S User Manual

User Guide for the SIP-T46S IP Phone

Phone Lock

You can lock your phone temporarily when you are not using it. This feature helps to protect
your phone from unauthorized use.
Phone lock consists of the following:
Menu Key:
Function Keys:
All Keys:
The emergency number setting, if desired, must be made before lock activation. For more
Note
information, refer to
To activate the phone lock via phone user interface:
Press Menu->Basic->Phone Lock.
1.
Enter the desired PIN (default PIN: 123) in the Unlock PIN field, and then press the OK soft
2.
key.
Press
3.
Press
4.
field.
Enter the desired interval of automatic phone lock in the Lock Time Out field.
5.
The default timeout is 0. It means the phone will not be automatically locked. You need to
long press
52
The Menu soft key is locked. You cannot access the menu of the
phone until unlocked.
The function keys are locked. You cannot use the MESSAGE, REDIAL,
HOLD, MUTE, TRANSFER, OK, X, navigation keys and soft keys until
unlocked.
All keys are locked except the Volume key, digit keys, # key, * key,
HEADSET key and Speakerphone key. You are only allowed to dial
emergency numbers, reject incoming calls by pressing the X key or
Reject soft key, answer incoming calls by lifting the handset,
pressing the Speakerphone key, the HEADSET key, the OK key or
Answer soft key, and end the call by hanging up the handset,
pressing the Speakerphone key, End Call soft key or X key.
Emergency Number
or , or the Switch soft key to select Enabled from the Lock Enable field.
or , or the Switch soft key to select the desired type from the Lock Type
to lock it immediately when the phone is idle.
on page 112.