Specific Dnp Features; Unsolicited Reporting Pick Up - ABB REF610 Technical Reference Manual

1MRS755535
OBJECT
Object Variation Description
group
83 1 Private Registration Object
83 2 Private Registration Object
Descriptor
90 1 Application Identifier
100 1 Short Floating Point
100 2 Long Floating Point
100 3 Extended Floating Point
101 1 Small Packed Binary-Coded
Decimal
101 2 Medium Packed Binary-Coded
Decimal
101 3 Large Packed Binary-Coded
Decimal
No Object
5.1.16.4.
Feeder Protection Relay
Technical Reference Manual - ANSI Version

Specific DNP features

Time synchronization
If time synchronization (minute-pulse or second-pulse) of the relay's real-time clock
is realized via a digital input, the following applies to the DNP interface of the relay:
Depending on the pulse type, either the date-to-minute or the date-to-second
*
information of the DNP time synchronization message is used.
The relay sends only one request for time synchronization to the DNP master,
*
which is at power up.

Unsolicited reporting pick up

Due to implementation differences in DNP master devices, the following alternative
unsolicited reporting (SPA parameter 503V24) pick ups are available in the relay:
1 = Unsolicited reporting starts immediately, without permission from the master.
*
2 = The relay sends an empty unsolicited response message when
*
communication begins, which the master confirms. After this, the relay starts to
send unsolicited responses.
3 = The relay sends an empty unsolicited response message when
*
communication begins, which the master confirms. After this, the master enables
unsolicited reporting for certain or all classes using function 20. Classes which
are not enabled remain disabled.
Only the last alternative is compliant with the DNP 3.0 standard.
REQUEST
(slave must parse)
Function Qualifier
codes (dec) codes (hex)
13, 14
REF610 REF610
RESPONSE
(master must parse)
Function Qualifier
codes (dec) codes (hex)
113