Ide Master, Ide Slave - IEI Technology AFL-4 Series-N270 User Manual And Service Manual


Legacy IDE Channels [SATA Pri, PATA Sec]

SATA Only

SATA Pri, PATA Sec

PATA Only

IDE Master and IDE Slave
When entering setup BIOS automatically detects the presence of IDE devices. The BIOS
displays the status of the auto detected IDE devices. The following IDE devices are
detected and are shown in the IDE Configuration menu:

Primary IDE Master

Secondary IDE Master

Secondary IDE Slave
The IDE Configuration menu (
IDE devices installed in the system. If an IDE device is detected and one of the above
listed four BIOS configuration options are selected, the IDE configuration options shown in
Section 6.3.2.1 appear.

6.3.2.1 IDE Master, IDE Slave

Use the IDE Master and IDE Slave configuration menu (BIOS Menu 5) to view both
primary and secondary IDE device details and configure the IDE devices connected to the
system.
Page 86
AFL-4 Series-N270 User Manual
Enhanced mode. In this mode, IDE channels and SATA
channels are separated. This mode supports up to 6
storage devices. Some legacy OS do not support this
mode.
Only the SATA drives are enabled.
D The IDE drives are enabled on the Primary
EFAULT
IDE channel. The SATA drives are enabled on
the Secondary IDE channel.
The IDE drives are enabled on the primary
and secondary IDE channels. SATA drives
are disabled.
B IOS Menu 4) allows changes to the configurations for the
6