Ide Master, Ide Slave; Legacy Ide Channels [Sata Only]; Ide Master And Ide Slave - IEI Technology POC 965 SERIES User Manual

Legacy IDE Channels [SATA Only]

SATA Only
SATA Pri., PATA Sec
PATA Only

IDE Master and IDE Slave

When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the
status of the auto detected IDE devices. The following IDE devices are detected and are
shown in the IDE Configuration menu:
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Third IDE Master
Third IDE Slave
Fourth IDE Master
Fourth IDE Slave
The IDE Configuration menu (BIOS Menu 4) allows changes to the configurations for the
IDE devices installed in the system. If an IDE device is detected, and one of the above
listed four BIOS configuration options are selected, the IDE configuration options shown in
Section 6.3.2.1 appear.

6.3.2.1 IDE Master, IDE Slave

Use the IDE Master and IDE Slave configuration menu to view both primary and
secondary IDE device details and configure the IDE devices connected to the system.
Page 60
POC 965 Series Medical Panel PC
storage devices. Some legacy OS do not support this
mode.
D
EFAULT