Ide Master, Ide Slave; Legacy Ide Channels [Sata Pri, Pata Sec]; Ide Master And Ide Slave - IEI Technology AFOLUX 915A Series User Manual

AFOLUX 915 Series Flat Panel PC

Legacy IDE Channels [SATA Pri, PATA Sec]

SATA Only
SATA Pri,
PATA Sec
PATA Only

IDE Master and IDE Slave

When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the
status of the auto detected IDE devices. The following IDE devices are detected and are
shown in the IDE Configuration menu:
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
The IDE Configuration menu allows changes to the configurations for the IDE devices
installed in the system. If an IDE device is detected, and one of the above listed four BIOS
configuration options are selected, the IDE configuration options shown in Section 5.3.2.1
appear.

5.3.2.1 IDE Master, IDE Slave

Use the IDE Master and IDE Slave configuration menu to view both primary and
secondary IDE device details and configure the IDE devices connected to the system.
channels are separated. This mode supports up to 6
storage devices. Some legacy OS do not support this
mode.
Only the SATA drives are enabled.
The IDE drives are enabled on the Primary IDE
D
EFAULT
channel. The SATA drives are enabled on the
Secondary IDE channel.
The IDE drives are enabled on the primary and
secondary IDE channels. SATA drives are disabled.
Page 75