Siemens SIMOCODE pro Manual page 49

6.6 Configuring the DM-F PROFIsafe and integrating it into the fail-safe automation system using PROFIBUS/
To store the set PROFIsafe address:
The set PROFIsafe address is stored after switching on the power supply.
● Briefly press the SET / RESET button: LEDs 1 to 10 indicate the current PROFIsafe
address.
Figure 6-4
NOTICE
PROFIsafe address
The PROFIsafe address 1023 is set in the delivery state.
You must set a valid address in the range from 0 to 1022.
SIMOCODE pro - Fail-Safe Digital Modules
Manual, 11/2017, NEB631679702000/RS-AA/002
SET / RESET button
Planning/Configuring
PROFIsafe or PROFINET/PROFIsafe
49