6.2.2
Integrating the 3RW5 soft starter with EDS file into the EtherNet/IP system
Requirements
● Configuration software of the controller (e.g. Rockwell Studio 5000)
● EDS file
EtherNet/IP EDS file (https://support.industry.siemens.com/cs/ww/en/ps/16212/dl)
Procedure
1. Install the EDS file.
2. Select the 3RW5 soft starter in the configuration software of the controller.
3. Insert the 3RW5 soft starter in the EtherNet/IP system.
Result
The 3RW5 soft starter is integrated into the EtherNet/IP system as an adapter in the
configuration software of the controller.
SIRIUS 3RW5 EtherNet/IP communication module
Manual, 05/2019, A5E45131885002A/RS-AA/001
6.2 Configuring the 3RW5 soft starter
Configuring
47