Specifications: C2050 - Teledyne G3-GM10-M0641 User Manual

Specifications: C2050

Supported Features
Resolution
Sensor
Pixel Size
Shutter type
Firmware option
(Field programmable)
Full Well charge; dependent on
Firmware Design Loaded
Sensitivity to Saturation
Max. Internal Frame Rate
Full resolution
Maximum Sustained Frame Rate
v1) *
Output (with TurboDrive
Maximum Sustained Frame Rate
Output (without TurboDrive)
Pixel Data Formats
Trigger to Exposure Minimum delay
(Synchronous Exposure Alignment)
Trigger to Exposure Minimum delay
(Reset Exposure Alignment)
Trigger to Exposure Start jitter (best
case with Synchronous Exposure
Alignment)
Trigger to Exposure Start jitter
(Reset Exposure Alignment)
Actual Exposure Time Minimum
(see "exposureTimeActual"
in Sensor Control)
Min. Time from End of Exposure to
Start of Next Exposure
Horizontal Line Time:
Readout Time
Auto-Brightness
Black offset control
Gain Control
Binning Support
Decimation Support
Defective Pixel Replacement
Image Correction
Nano Series GigE Vision Camera
Full frame electronic global shutter function
High Sensitivity
Design (Bayer)
2750e- (max)
4x
143 fps
82 fps (8-bit)
38 fps (8-bit)
Bayer 8-Bit
2 line time
(8.8 µs)
Max 1 line
(0 to 4.4µs)
18.1µs (1 line time+13.73 us)
(increment of 4.4µs steps)
10 lines–13.73µs
(30.3 µs)
4.4µs
(H Line Time) x (lines in frame +23) — in μs
Yes , with Auto-Exposure and AGC (FPGA Gain or Sensor Gain)
In-FPGA Digital Gain (1x to 4x) in 0.007x steps
Nano-C2050
2064 x 1544
Sony IMX252 (3.2M)
3.45 µm x 3.45 µm
Standard Design
(Bayer)
82 fps (8-bit)
38 fps (8-bit)
Bayer 8-Bit
0 µs
0 µs
19.1µs (1 line time + 13.73 us)
(increment of 5.4µs steps)
10 lines–13.73µs
Yes (in DN)
In-sensor Gain (1.0x to 251x)
No
No
No
No
Genie Nano Specifications
RGB-Output
Standard Design
11ke (max)
1x
116 fps
N/A
9.7 fps (RGBA)
14.5 fps (RGB)
19 fps (Yuv422)
38 fps (mono8)
RGBA 32-bit
RGB 24-bit
Yuv422 16-bit
Mono 8-bit
2 line time
(10.8 µs)
Max 1 line
(0 to 5.4µs)
(40.4 µs)
5.4µs
•
31