Teledyne G3-GM10-M0641 User Manual page 155

Binning Selector
In Sensor
In Digital Domain
Binning Mode
Sum
Average
Binning Horizontal
Binning Vertical
Decimation Selector
In Sensor
In Digital Domain
Decimation Horizontal
Decimation Vertical
Test Image Selector
Off
Nano Series GigE Vision Camera
binningSelector Select how the Horizontal and Vertical Binning is done. The
Binning function can occur in the Digital domain of a device
or at the actual sensor.
< Beginner >
InSensor The Binning function can be done inside the Sensor itself,
which often allows binning to increase the data rate from
the sensor.
InDigitalDomain The Binning function can be done inside the device but with
a digital processing function. Binning doesn't affect the
current data rate from the sensor or camera.
binningMode Sets the mode used to combine pixels together when
BinningHorizontal and/or BinningVertical is greater than 1.
< Beginner >
Sum The responses from the individual pixels are added
together, resulting in increased sensitivity.
Average The responses from the individual pixels are averaged,
resulting in increased signal to noise ratio.
BinningHorizontal Number of horizontal pixels to combine together using the
method selected by binningMode. This reduces the
horizontal resolution of the image.
< Beginner >
BinningVertical Number of vertical pixels to combine together using the
method selected by binningMode. This reduces the vertical
resolution of the image.
< Beginner >
decimationSelector Select how Horizontal and Vertical Decimation is done. The
Decimation function can operate in the Digital domain of a
device or directly at the sensor.
< Beginner >
InSensor The Decimation function operates directly in the Sensor,
thus reducing the pixel count from the sensor and camera.
InDigitalDomain The Decimation function operates in the device with a
digital processing function. Decimation doesn't affect the
current data rate from the sensor or camera.
DecimationHorizontal Horizontal sub-sampling of the image. This reduces the
horizontal resolution of the image by the specified
horizontal decimation factor. For example, when set to 2,
every second pixel is discarded.
< Beginner >
DecimationVertical Vertical sub-sampling of the image. This reduces the
vertical resolution of the image by the specified vertical
decimation factor. For example, when set to 2, every
second line is discarded.
< Beginner >
TestImageSelector Selects the type of test image generated by the camera.
< Beginner >
Off Image is from the camera sensor.
Ver. 1.06 Ver. 1.03 —
(Available (Available
on some on some
models) models)
Ver. 1.06
NanoXL
Ver. 1.07 Ver. 1.07 —
(Available (Available
on some on some
models) models)
Ver. 1.07
NanoXL
Ver. 1.03
Ver. 1.03
— — Ver. 1.06
Ver. 1.06
Ver. 1.06
Operational Reference
•
153