Teledyne G3-GM10-M0641 User Manual page 56

Trigger to Exposure Start jitter (best
case with Synchronous Exposure
Alignment)
Trigger to Exposure Start jitter
(Reset Exposure Alignment) *
Exposure Time Minimum
(see "exposureTimeActual" in
Control)
Min. Time from End of Exposure to
Start of Next Exposure
Horizontal Line Time:
Readout Time
Auto-Brightness
Black offset control
Gain Control
Binning Support
Decimation Support
Defective Pixel Replacement
Image Correction
Image Flip Support
Multi-ROI Support
On-Board Image Memory
Output Dynamic Range (dB)
SNR (dB)
* Note: The actual internal minimum exposure may be different than what is programmed. Use the feature
"exposureTimeActual" from the
event is delayed 4 µs from the actual start.
•
54 Genie Nano Specifications
Sensor
Specifically: ( Horizontal line time at current resolution * number of lines ) + (3 *
( line time of the 1280 model ))
(1.0, 1.14, 1.33, 1.6, 2.0, 2.29, 2.67, 3.2, 4.0, 5.33, 8.0)
Yes In-FPGA
(summing and average,
2x2, 4x4 )
Yes In- Sensor
(averaging 2x2)
Yes, in Sensor, up to 16 ROI (mutually exclusive with binning)
Sensor Control category to read back the actual sensor exposure. The exposure start sensor
Up to 1 line time
0 µs
34 µs
(increment steps of 1µs)
19 µs – Normal Readout
18 µs – Fast Readout
3.86 µs – Normal Readout
2.83µs – Fast Readout
2332 µs – Normal Readout for 800 x 600
Add 75µs when overlapping Exposure and Readout
1713 µs – Fast Readout for 800 x 600
Add 62µs when overlapping Exposure and Readout
Yes , with Auto-Exposure and AGC (FPGA Gain)
Yes (in DN)
In-sensor Analog Gain (1.0x to 8x) in 11 gain steps
In-sensor Digital Gain (1x to 32x) in 0.01x steps
In-FPGA Digital Gain (1x to 4x) in 0.007x steps
No
Yes, up to 512 positions
Yes, Sensor FPN correction feature
Yes, In-Sensor, Vertical Only
90MB
62.1 dB (in 10-Bit Pixel Format)
38.8 dB (in 10-Bit Pixel Format)
No
Nano Series GigE Vision Camera