Teledyne G3-GM10-M0641 User Manual page 145

Features Activation Mode
Preset Configuration Selector
Exposure Time
Exposure Delay
Gain Selector
Sensor Analog
Gain
Horizontal Offset
Vertical Offset
Binning Horizontal
Binning Vertical
Line Selector
Nano Series GigE Vision Camera
cP_FeaturesActivationMode
Off
Active
cP_PresetConfigurationSelector
cP_ExposureTime
cP_ExposureDelay
cP_GainSelector
Sensor
SensorAnalog
cP_Gain
cP_OffsetX
cP_OffsetY
cP_BinningHorizontal
cP_BinningVertical
cP_LineSelector
Enables the selected feature to be part of the cycling.
When activating the selected feature, this will
automatically set the corresponding standard camera
feature to read only.
< Expert, DFNC >
Off Exclude the selected feature from the cycling.
Active Include the selected feature in the cycling.
Selects the cycling preset to configure.
< Expert, DFNC >
Sets the exposure time (in microseconds) for the selected
set. The maximum frame rate is dependent on the
longest cycling exposure time.
< Expert, DFNC >
Sets the exposure delay (in microseconds) for the
selected set.
< Expert, DFNC >
Selects which gain is controlled when adjusting cp_Gain
features.
< Expert, DFNC >
SensorAll Applies to Sony sensor models: Gain is adjusted within
the sensor. The first half of the gain range is applied in
the analog domain and the second half is digital.
Applies to OnSemi sensor models: Analog gain is adjusted
within the sensor.
Sets the selected gain as an amplification factor applied
to the image. This gain is applied when the current
Cycling index is active.
< Expert, DFNC >
Horizontal offset from the origin to the region of interest
(ROI). The value in this feature is only used when the
currently selected cycling preset is active.
< Expert, DFNC >
Vertical offset from the origin to the region of interest
(ROI). The value in this feature is only used when the
currently selected cycling preset is active.
< Expert, DFNC >
Number of horizontal photo-sensitive cells to combine
together. This increases the intensity of the pixels but
reduces the horizontal resolution of the image.
< Expert, DFNC >
Number of vertical photo-sensitive cells to combine
together. This increases the intensity of the pixels but
reduces the vertical resolution of the image.
< Expert, DFNC >
Selects which physical line (or pin) of the external device
connector to configure.
< Expert, DFNC >
Ver. 1.01
Ver. 1.01
Ver. 1.01
Ver. 1.01
Ver. 1.04 Ver. 1.04
Ver. 1.04 Ver. 1.04
Ver. 1.01 Ver. 1.05
Ver. 1.01 Ver. 1.05
Ver. 1.03 Ver. 1.03
Ver. 1.03 Ver. 1.03
Ver. 1.01
•
Operational Reference 143