Teledyne G3-GM10-M0641 User Manual page 272

Monochrome Sensors (case 1: single bad pixel)
A bad even pixel is replaced by the good odd pixel of the same pixel pair.
•
A bad odd pixel is replaced by the good even pixel of the same pixel pair.
•
Pixel Pair 1
even
pix0
Sensor Row
Monochrome Sensors (case 2: bad pixel pair)
When a pixel pair has both even and odd pixels marked as bad, the even pixel is replaced by
•
the preceding odd pixel and the odd pixel is replaced by the following even pixel (even if it is
marked as a bad pixel).
Pixel Pair 1
even
pix0
Sensor Row
Monochrome Sensors (case 3: bad pixel pairs at boundaries)
• When the first pixel pair of the first image row has both even and odd pixels marked as bad,
the even pixel is replaced by indeterminate data from the preceding memory location. The bad
odd pixel is replaced by the following even pixel (even if it is also marked as a bad pixel).
Pixel Pair 1
even
pix0
First Sensor Row
Indeterminate Data
When the first pixel pair of an image row has both even and odd pixels marked as bad, the
•
even pixel is replaced by pixel from the preceding row's last pixel. The bad odd pixel is replaced
by the following even pixel (even if it is also marked as a bad pixel).
•
270 Addendums
Pixel Pair 2
odd even
pix1 pix2
Pixel Pair 2
odd even
pix1 pix2
Pixel Pair 2
odd even
pix1 pix2
Pixel Pair 3
odd even
pix3 pix4
Pixel Pair 3
odd even
pix3 pix4
Pixel Pair 3
odd even
pix3 pix4
Nano Series GigE Vision Camera
Pixel Pair 4
odd even
pix5 pix6
Pixel Pair 4
odd even
pix5 pix6
Pixel Pair 4
odd even
pix5 pix6
odd
pix7
odd
pix7
odd
pix7