Teledyne G3-GM10-M0641 User Manual page 65

Image Correction
Image Flip support
Multi-ROI Support
On-board Image memory
Output Dynamic Range (dB)
SNR (dB)
** Limited to the Genie Nano Architecture:
~250MB/sec Sustained into the TurboDrive Engine achieved using 1500 Byte Packet Size
‡‡ Horizontal Line Time: Table Values and Formulas
Values stated in the table are calculated for the maximum sensor widths, specifically:
Model M5100=5120 pixels
•
Model M4090=4096 pixels
•
The following formulas describe Horizontal Line Time. Note that in "Fast Readout" mode, the line
time does not reduce for widths below 4032 pixels, thus no need to calculate applicable time values
for shorter lines.
Horizontal line time (Standard Firmware, Normal mode) =
•
Horizontal line time** (Standard Firmware, Fast Readout mode) =
•
Horizontal line time (High Speed Firmware, Normal mode) =
•
• Horizontal line time** (High Speed Firmware, Fast Readout mode) =
Nano Series GigE Vision Camera
Flat Line Correction (Factory and 4 User Defined entries)
Yes, vertical only (in-sensor)
Yes, (in-sensor) up to 16 ROI
55.3 55.3
39.4 39.6
500MB
55.3
39.4
�������� ���� ����ℎ
� �+ 1104
4
72
�������� ���� ����ℎ
� �+ 96
4
72
�������� ���� ����ℎ
� �+ 552
8
72
�������� ���� ����ℎ �+ 48
�
8
72
Genie Nano Specifications
55.3
39.6
•
63