Teledyne G3-GM10-M0641 User Manual page 116

TriggerOverlap=ReadOut
•
Trigger is accepted at the beginning of the frame Readout. The "End of Exposure to Start of
•
Readout" time is sensor dependent.
Diagram Conditions:
• TriggerMode=On
ExposureMode=Timed
•
TriggerActivation=RisingEdge
•
TriggerDelay=0
•
TriggerSelector=FrameStart
•
ExposureAlignment=Synchronous
•
TriggerOverlap=Readout
Trigger Input
Frame Exposure
Frame Readout
Timing specific to OnSemi models
Trigger to Exposure start has a delay which includes the sensor readout time plus a
•
minimum of 62µs. An exposure always starts after the readout of the previous frame.
Trigger Delay Times (min. with normal ROT):
•
M/C2590: 23318µs
•
M/C1930: 10907µs
•
M/C1280: 5751µs
•
M/C800: 2407µs
•
M/C640: 1677µs
•
•
114 Operational Reference
Trigger Exclusion Period
Exposure 1
End of Exposure
to Start of Readout
Frame 1 Active period
Trigger Exclusion Period
Exposure 2
End of Exposure
to Start of Readout
Readout 1
Frame 2 Active period
Nano Series GigE Vision Camera
Readout 2