Teledyne G3-GM10-M0641 User Manual page 208

Factory Flat Line coefficients 7
Factory Flat Line coefficients 8
User Flat Line coefficients 1
User Flat Line coefficients 2
User Flat Line coefficients 3
User Flat Line coefficients 4
User Defined Saved Image
File Operation Selector FileOperationSelector
Open
Close
Read
Write
Delete
File Operation Execute FileOperationExecute
User Defined Saved Image userDefinedSavedImage
File Open Mode FileOpenMode
Read
Write
File Access Buffer FileAccessBuffer
File Access Offset FileAccessOffset
File Access Length FileAccessLength
File Operation Status FileOperationStatus
Success
•
206 Operational Reference
FlatFieldCoefficients07 Select factory Flat Line coefficients7. These are the factory
values used when the camera fastReadoutMode is Active
and sensor Gain is 1.87.
FlatFieldCoefficients08 Select factory Flat Line coefficients 8. These are the
factory values used when the camera fastReadoutMode is
Active and sensor Gain is 3.17.
FlatFieldCoefficients1 Select user flatfield coefficients1. These are the coefficient
values used when the sensor analog Gain is 1.0.
FlatFieldCoefficients2 Select user flatfield coefficients2. These are the coefficient
values used when the sensor Gain is 1.26.
FlatFieldCoefficients3 Select user flatfield coefficients3. These are the coefficient
values used when the sensor Gain is 1.87.
FlatFieldCoefficients4 Select user flatfield coefficients4. These are the coefficient
values used when the sensor Gain is 3.17.
userDefinedSavedImage Upload and download an image in the camera.
Selects the target operation for the selected file in the
device. This operation is executed when the File Operation
Execute feature is called. < Guru >
Open Select the Open operation – executed by
FileOperationExecute.
Close Select the Close operation – executed by
FileOperationExecute
Read Select the Read operation – executed by
FileOperationExecute.
Write Select the Write operation – executed by
FileOperationExecute.
Delete Select the Delete operation – executed by
FileOperationExecute.
Executes the operation selected by File Operation Selector
on the selected file. < Guru >
Upload or download an image in the camera.
< DFNC - Guru >
Selects the access mode used to open a file on the device.
< Guru >
Read Select READ only open mode
Write Select WRITE only open mode
Defines the intermediate access buffer that allows the
exchange of data between the device file storage and the
application.
Controls the mapping offset between the device file
storage and the file access buffer.
Controls the mapping length between the device file
storage and the file access buffer.
Displays the file operation execution status. < Guru >
Success The last file operation has completed successfully.
< Guru >
< Guru >
< Guru >
1.06
—
— 1.06
— 1.06
— 1.06
— 1.06
— 1.06
1.04
1.06
1.00
1.06
1.00
1.06
1.00
1.06
1.00
1.06
1.00
1.06
1.00
1.06
1.00
1.06
1.00
1.06
Nano Series GigE Vision Camera