Teledyne G3-GM10-M0641 User Manual page 97

Black Level Selector
Analog
Black Level
Fast Readout Mode
Off
Active
Sensor FPN Correction
Mode
Off
Active
Nano Series GigE Vision Camera
BlackLevelSelector
AnalogAll
BlackLevel
fastReadoutMode
Off
Active
sensorFpnCorrectionMode
Off
Active
Selects which Black Level to adjust using the Black Level features.
< Beginner >
Sensor Dark Offset
Controls the black level as an absolute physical value. This represents a DC offset applied to the
video signal, in DN (digital number) units. The Black Level Selector feature specifies the channel to
adjust.
< Beginner >
Selects the sensor's readout mode.
< Guru, 1.01 >
When this mode is off, the row blanking and row readout occur sequentially in the sensor.
When this mode is active, the row blanking and row readout occur in parallel in the sensor. This
helps achieve a lower total frame readout time resulting in a faster maximum frame rate. There are
minor DN column artifacts, typically of no significance.
Activation mode for the sensor Fixed Pattern Noise correction function.
< Guru, 1.01 >
Disables the sensor FPN Correction Mode
Enables the sensor FPN Correction Mode.
Note: Applicable to the models listed below
M640, M640 NIR, C640
M800, M800 NIR, C800
M1280, M1280 NIR, C1280
ver. 1.02
ver. 1.02
•
Operational Reference 95