Table of Contents
Advertisement
Eaton 93PS UPS 8–40 kW
Color LED indicators (screen and door)
7.1.3
When the UPS system is running in the double conversion mode, it continually
monitors itself and the incoming utility power. In the battery or bypass mode, the
UPS may issue alarms to let you know exactly what event caused the change
from the double conversion mode. System events on the UPS can be indicated
by horns, lights, messages, or all three.
Select Logs in the home screen to look at any currently active events.
•
System event horn
The system event horn beeps to alert the user that an event requiring
attention is taking place.
•
System event indicators
The status indicators on the UPS control panel and the event horn let you
know when the UPS system is operating in any mode other than the double
conversion mode. Only the green indicator for normal operation is visible
during normal UPS system operation. The other indicators illuminate to
indicate alarms or events. When an alarm occurs, first check these indicators
to see what type of event has taken place.
•
System event messages
When a system event occurs, a message appears in the status bar of the
display. This message is also written to the Active Events log. Some notices
and alarms may be accompanied by an audible horn. To silence the horn,
press any button once.
7.1.4
The following table shows the menu structure of the 93PS UPS.
Table 14: Menu structure of the 93PS UPS
Main menu
Home
©
Eaton Corporation plc 2016. All rights reserved.
System events
Menu structure of the 93PS UPS
Submenu
-
UPS status
Alarm
Functions
An overview of the UPS operation, including informa-
tion on load, efficiency and consumption.
Revision: 003
Document ID: P-164000493
User's and installation guide
76 (104)
Advertisement
Table of Contents
