Minislot Cards - Eaton 93PS-8(20)-20(-C) User And Installation Manual

Eaton 93PS UPS 8–40 kW
Figure 22. Communication interfaces in the 93PS UPS 20 kW standard and C-model
frames
Figure 23. Communication interfaces in the 93PS UPS 40 kW frame
1 TB11, not used
2 TB10, not used
3 TB9, not used
4 TB8, external CAN termination
5 TB7, external CAN
6 TB6, pull chain bus
7 USB1, USB host (connection to
accessories)
8 USB2, USB device (connection to
computer)
6.1
The Eaton 93PS UPS has 2 MiniSlot communication bays. To install a MiniSlot
card, follow the instructions in Section
The UPS is compatible with the following MiniSlot cards:
• Network Card-MS
©
Eaton Corporation plc 2016. All rights reserved.

MiniSlot cards

9 MiniSlot 1
10 TB1, signal input 1–5
11 TB2, not used
12 TB3, not used
13 Serial COM port RS-232
14 MiniSlot 2
15 TB4, EPO
16 TB5, relay output
5.5.5
.
Revision: 003 Document ID: P-164000493
User's and installation guide
66 (104)