Eaton 93PS UPS 8–40 kW
3.1
Figure 2. Looking inside the Eaton 93PS UPS 20 kW standard and C-model frames
Figure 3. Looking inside the Eaton 93PS 40 kW frame
1.
Control panel
2.
Door latch
3.
Power module (UPM)
4.
Internal battery (not included in the C-
model)
5.
Communications area
The system level static bypass in the Eaton 93PS UPS cabinet determines the
attainable output power of the UPS. The static bypass line consists of a static
switch and a backfeed protection isolation device connected in series. In
addition, there is a system level control unit that constantly monitors the power
delivered through the bypass line or to the input of the UPS. Transfers to static
©
Eaton Corporation plc 2016. All rights reserved.
Looking inside the UPS system
6.
Input switch
7.
Battery breaker for internal batteries *
8.
Maintenance bypass switch (optional)
*
In the C-model for external batteries
Revision: 003
Document ID: P-164000493
User's and installation guide
17 (104)