Table of Contents
Advertisement
Diagnostic tools
Product QuickSpecs
For more information about product features, specifications, options, configurations, and compatibility, see the product
QuickSpecs on the Hewlett Packard Enterprise website (https://www.hpe.com/info/qs).
UEFI System Utilities
The UEFI System Utilities is embedded in the system ROM. Its features enable you to perform a wide range of
configuration activities, including:
•
Configuring system devices and installed options.
•
Enabling and disabling system features.
•
Displaying system information.
•
Selecting the primary boot controller or partition.
•
Configuring memory options.
•
Launching other preboot environments.
HPE servers with UEFI can provide:
•
Support for boot partitions larger than 2.2 TB. Such configurations could previously only be used for boot drives when
using RAID solutions.
•
Secure Boot that enables the system firmware, option card firmware, operating systems, and software collaborate to
enhance platform security.
•
UEFI Graphical User Interface (GUI)
•
An Embedded UEFI Shell that provides a preboot environment for running scripts and tools.
•
Boot support for option cards that only support a UEFI option ROM.
Selecting the boot mode
This server provides two Boot Mode configurations: UEFI Mode and Legacy BIOS Mode. Certain boot options require that
you select a specific boot mode. By default, the boot mode is set to UEFI Mode. The system must boot in UEFI Mode to
use certain options, including:
•
Secure Boot, UEFI Optimized Boot, Generic USB Boot, IPv6 PXE Boot, iSCSI Boot, and Boot from URL
•
Fibre Channel/FCoE Scan Policy
NOTE: The boot mode you use must match the operating system installation. If not, changing the boot mode can impact
the ability of the server to boot to the installed operating system.
Prerequisite
When booting to UEFI Mode, leave UEFI Optimized Boot enabled.
106
Diagnostic tools
Advertisement
Table of Contents
