Understanding Web-Based Authentication; Device Roles; Host Detection; Configuring Web-Based Authentication - Cisco Catalyst 2975 Software Configuration Manual

Ios release 12.2(55)se
Hide thumbs Also See for Catalyst 2975:
Table of Contents

Advertisement

Understanding Web-Based Authentication

Device Roles

With web-based authentication, the devices in the network have these specific roles:
Figure 11-1
Figure 11-1
Workstations
(clients)

Host Detection

The switch maintains an IP device tracking table to store information about detected hosts.
Note
By default, the IP device tracking feature is disabled on a switch. You must enable the IP device tracking
feature to use web-based authentication.
For Layer 2 interfaces, web-based authentication detects IP hosts by using these mechanisms:
Catalyst 2975 Switch Software Configuration Guide
11-2
Web Authentication Customizable Web Pages, page 11-6
Web-based Authentication Interactions with Other Features, page 11-7
Client—The device (workstation) that requests access to the LAN and the services and responds to
requests from the switch. The workstation must be running an HTML browser with Java Script
enabled.
Authentication server—Authenticates the client. The authentication server validates the identity of
the client and notifies the switch that the client is authorized to access the LAN and the switch
services or that the client is denied.
Switch—Controls the physical access to the network based on the authentication status of the client.
The switch acts as an intermediary (proxy) between the client and the authentication server,
requesting identity information from the client, verifying that information with the authentication
server, and relaying a response to the client.
shows the roles of these devices in a network:
Web-Based Authentication Device Roles
Catalyst switch
Cisco Router
ARP based trigger—ARP redirect ACL allows web-based authentication to detect hosts with a static
IP address or a dynamic IP address.
Dynamic ARP inspection
DHCP snooping—Web-based authentication is notified when the switch creates a DHCP-binding
entry for the host.
Authentication
server
or
(RADIUS)
Chapter 11

Configuring Web-Based Authentication

OL-19720-02

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents