Collecting Group Ethernet Statistics On An Interface - Cisco Catalyst 2975 Software Configuration Manual

Configuring RMON
Command
Step 6
show rmon history
Step 7
copy running-config startup-config
To disable history collection, use the no rmon collection history index interface configuration
command.

Collecting Group Ethernet Statistics on an Interface

Beginning in privileged EXEC mode, follow these steps to collect group Ethernet statistics on an
interface. This procedure is optional.
Command
Step 1 configure terminal
Step 2
interface interface-id
Step 3
rmon collection stats index [owner ownername] Enable RMON statistic collection on the interface.
Step 4
end
Step 5 show running-config
Step 6 show rmon statistics
Step 7 copy running-config startup-config
To disable the collection of group Ethernet statistics, use the no rmon collection stats index interface
configuration command.
This example shows how to collect RMON statistics for the owner root:
Switch(config)# interface gigabitethernet2/0/1
Switch(config-if)# rmon collection stats 2 owner root
Catalyst 2975 Switch Software Configuration Guide
28-6
Purpose
Display the contents of the switch history table.
(Optional) Save your entries in the configuration file.
Purpose
Enter global configuration mode.
Specify the interface on which to collect statistics, and enter
interface configuration mode.
• For index, specify the RMON group of statistics. The range
is from 1 to 65535.
• (Optional) For owner ownername, enter the name of the
owner of the RMON group of statistics.
Return to privileged EXEC mode.
Verify your entries.
Display the contents of the switch statistics table.
(Optional) Save your entries in the configuration file.
Chapter 28 Configuring RMON
OL-19720-02