Network Configuration Examples - Cisco Catalyst 2975 Software Configuration Manual

Chapter 1 Overview
•
•
•
•
•
•
•
•
•
•
•

Network Configuration Examples

This section provides network configuration concepts and includes examples of using the switch to
create dedicated network segments and interconnecting the segments through Fast Ethernet and Gigabit
Ethernet connections.
•
•
•
Design Concepts for Using the Switch
As your network users compete for network bandwidth, it takes longer to send and receive data. When
you configure your network, consider the bandwidth required by your network users and the relative
priority of the network applications that they use.
OL-19720-02
MVR is disabled. For more information, see
Port-based traffic
Broadcast, multicast, and unicast storm control is disabled. For more information, see
–
Chapter 23, "Configuring Port-Based Traffic Control."
No protected ports are defined. For more information, see
–
Traffic Control."
– Unicast and multicast traffic flooding is not blocked. For more information, see
"Configuring Port-Based Traffic Control."
– No secure ports are configured. For more information, see
Traffic Control."
CDP is enabled. For more information, see
UDLD is disabled. For more information, see
SPAN and RSPAN are disabled. For more information, see
RSPAN."
RMON is disabled. For more information, see
Syslog messages are enabled and appear on the console. For more information, see
"Configuring System Message Logging."
SNMP is enabled (Version 1). For more information, see
No ACLs are configured. For more information, see
with ACLs."
QoS is disabled. For more information, see
No EtherChannels are configured. For more information, see
EtherChannels and Link-State Tracking."
"Design Concepts for Using the Switch" section on page 1-15
"Small to Medium-Sized Network Using Catalyst 2975 Switches" section on page 1-19
"Long-Distance, High-Bandwidth Transport Configuration" section on page 1-20
Network Configuration Examples
Chapter 22, "Configuring IGMP Snooping and MVR."
Chapter 23, "Configuring Port-Based
Chapter 23, "Configuring Port-Based
Chapter 24, "Configuring CDP."
Chapter 26, "Configuring UDLD."
Chapter 27, "Configuring SPAN and
Chapter 28, "Configuring RMON."
Chapter 30, "Configuring SNMP."
Chapter 31, "Configuring Network Security
Chapter 33, "Configuring QoS."
Chapter 37, "Configuring
Catalyst 2975 Switch Software Configuration Guide
Chapter 23,
Chapter 29,
1-15