Cisco Catalyst 2975 Software Configuration Manual page 807

Configuring IPv6 Host Functions
This chapter describes how to configure IPv6 host functions on the Catalyst 2975 switches.
For information about configuring IPv6 Multicast Listener Discovery (MLD) snooping, see
"Configuring IPv6 MLD Snooping."
To enable dual stack environments (supporting both IPv4 and IPv6), you must configure the switch to
use the a dual IPv4 and IPv6 switch database management (SDM) template. See the
Protocol Stacks" section on page
For complete syntax and usage information for the commands used in this chapter, see the Cisco IOS
Note
documentation referenced in the procedures.
This chapter consists of these sections:
"Understanding IPv6" section on page 35-2
•
"Configuring IPv6" section on page 35-7
•
"Displaying IPv6" section on page 35-11
•
OL-19720-02
C H A P T E R
35-4.
Catalyst 2975 Switch Software Configuration Guide
35
Chapter 36,
"Dual IPv4 and IPv6
35-1