Visonic PowerMaster-360R User Manual page 27

or
F05:keyfob
☺

Return to step 2
B. To set partition authorization
6.
F05:PARTITIONS
7.
F05: P1 P2 P3
F05: P1 P2 P3
☺

Return to step 2
C. To delete a keyfob
1.
KEYFOBS
2.
ADD NEW KEYFOB
3.
DELETE KEYFOB
F01:keyfob
4.
or
F06:keyfob
ID No. 300-6108
5.
<OFF> to delete
6.
☺

Go to step 3
DELETE KEYFOB

When PARTITIONING is enabled.
D-307084 PowerMaster-360R User's Guide
To assign the keyfob to another user, for example, "User No. 5", key in [05] or
alternatively click the
[F05:Keyfob] and then press
DEVICE ENROLLED
The display reads [
enrolled manually by entering the ID number, a "Success Tune" 
and the display will then change to [

The display will read [F05:PARTITIONS]. To enter the menu, press
10
Use the keypad keys
partitions P1, P2 & P3, respectively.
When you are satisfied with the setting, for example, User 5 is authorized with
Partition 1 and 3 only, press
A "Success Tune" 
Enter the [USER SETTINGS] menu, select the [KEYFOBS] option and press
. 1
The display will read [ADD NEW KEYFOB].
button until the display reads [DELETE KEYFOB].
Click the
Press .
The display will read [F01:Keyfob] alternating with the ID number of the keyfob.
Key in the keyfob number you wish to delete, for example, [06] or
alternatively click the
keyfob number, for example, "F06:Keyfob" and "ID No. 300-5799".
When the keyfob you wish to delete appears on the display, press
The display now reads [<OFF> TO DELETE].
To delete the keyfob press the
A "Success Tune" 
and returns to step 3.
Menus and functions
or button until the display reads
to confirm.
] or [
F01:Keyfob
, , to change the status of the
11
to confirm.
☺
sounds. The display confirms the Partition setting.
or button until the display reads the
button.
☺
sounds and the display reads [
14
ID accepted
] if the keyfob was
☺
5 6
].
8
13
DELETE KEYFOB
sounds
.
12
3
7
.
]
27