Electrical Appliance Control; Control Options And Pushbuttons; Automatic On/Off Control - Visonic PowerMaster-360R User Manual

Reviewing events and alarm memory

4. Electrical Appliance Control

Control Options and Pushbuttons

The system allows manual or automatic remote control of a device connected to a PGM output.
The user defines the ON and OFF times via the scheduler (see Chapter 4 – B.14 Programming the Scheduler).
The installer determines which zone sensors will switch the remote controlled appliances on and off. However,
the decision whether the remote controlled appliance will respond as programmed is up to you (see the
following table).
Key Function
Manual activation of a light or other household electrical appliance that is connected to a PGM
output.
Manual deactivation of a light or other household electrical appliance that is connected to a PGM
output.
Selecting the active automatic control method:

Sensors: The appliance is controlled by sensors (assigned by the installer for this).

Timer: The appliance is controlled by timer (ON and OFF times are defined by the installer).

Both: The appliance is controlled by sensors as well as by a timer.
Examples of benefits gained by automatic remote control:
Timer Control: When you are away, the activation / deactivation of an electrical appliance can be timed.
Zone Control: upon disturbance of a perimeter zone, the electrical device is switched on.
Notes:
1. Automatic activation and deactivation of an electrical appliance also depends on the Scheduler setup
(see Chapter 4 – B.14 Programming the Scheduler).
2. PGM not to be enabled in UL listed products.

Automatic ON/OFF Control

You can select two of four options as follows:

By timer ON

By sensor ON
The currently active options are show with a dark box (
click the button.
A presently inactive option is shown without a dark box at the far right. The dark box will appear if you click
while the option is displayed. A "success tune" indicates the successful saving of a new option.
PRESS
If not satisfied - press
If satisfied - press
If not satisfied - Press
If satisfied -
12

By timer OFF

By sensor OFF
RESULTING DISPLAY
BY TIMER ON
(If this is the default)
BY TIMER OFF
BY TIMER OFF
BY TIMER OFF
BY SENSOR ON
BY SENSOR OFF
BY SENSOR OFF
BY SENSOR OFF
READY HH:MM
) at the far right hand side. To view the 2 other options
D-307084 PowerMaster-360R User's Guide