Powerlink Parameters - Visonic PowerMaster-360R User Manual

B.17 PowerLink parameters
The PLNK curr.params menu shows the current IP address, subnet mask, default gateway and current mode of
communication. The PowerLink information is for support purposes only.
 Here you can see
Carefully read the section titled "Additional information" according to the indicated references

table at end of this section.
1.
PLNK curr.params
2.
Curr.IP address
xxx.xxx.xxx.xxx
3.
Curr.subnet mask
xxx.xxx.xxx.xxx
4.
Current Gateway
xxx.xxx.xxx.xxx
5.
Current path
☺

Return to step 2
For detailed instructions on how to select the Setting Options – refer to sections A.1 and A.2.
1
2
To end this session and return to previous menu options, press the
3
You can now select another option in the User Settings menu (see section A.1 and section A.2), or quit
programming (see section A.3).
*
If the Broadband Module is not registered to the PowerMaster, this menu is not displayed.
D-307084 PowerMaster-360R User's Guide
*
the current IP address of the PowerLink and other relevant data
Enter the [USER SETTINGS] menu, select the [
option and press
Displays the current PowerLink IP address.
Displays the current PowerLink subnet mask.
Displays the current PowerLink default gateway.
Displays the current PowerLink mode of communication.
Press the
required mode and press
options: LAN; Cellular; WLAN; None.
2, 3
Additional information (section B.15)
Menus and functions
1
.
button repeatedly until the display shows the
. Select from one of the following
button.
.
etc. – see
1
PLNK curr.params
]
43