Default Settings - Cisco MDS 9000 Series Configuration Manual

Default Settings

5
5
5
5
Do you want to continue with the installation (y/n)? [n] y
Install is in progress, please wait.
Module 6:Force downloading.
-- SUCCESS
Syncing image bootflash:/SSI-2.1.1a to standby.
[####################] 100% -- SUCCESS
Syncing image bootflash:/boot-2-1-1a to standby.
[####################] 100% -- SUCCESS
Syncing image bootflash:/isan-2-1-1a to standby.
[####################] 100% -- SUCCESS
Setting boot variables.
[####################] 100% -- SUCCESS
Performing configuration copy.
[####################] 100% -- SUCCESS
Module 3:Upgrading Bios/loader/bootrom.
[####################] 100% -- SUCCESS
Module 6:Waiting for module online.
-- SUCCESS
"Switching over onto standby".
-----------------------------
Default Settings
This table lists the default settings for the supervisor module.
Table 31: Default Supervisor Module Settings
Parameter
Administrative connection
Global switch information
System clock
In-band (VSAN 1) interface
Cisco MDS 9000 Family NX-OS Fundamentals Configuration Guide
194
system 2.0(3)
kickstart 2.0(3)
bios v1.1.0(10/24/03)
loader 1.2(2)
2.1(1a) yes
2.1(1a) yes
v1.1.0(10/24/03) no
1.2(2) no
Default
Serial connection.
• No value for system name.
• No value for system contact.
• No value for location.
No value for system clock time.
IP address, subnet mask, and broadcast address
assigned to the VSAN are set to 0.0.0.0.
Managing Modules
OL-29291-02