C H A P T E - Cisco MDS 9000 Series Configuration Manual

New and Changed Information
This chapter provides release-specific information for each new and changed feature in the
Family NX-OS Fundamentals Configuration
following Cisco website:
http://www.cisco.com/en/US/products/ps5989/products_installation_and_configuration_guides_list.html
•
New and Changed Information
As of Cisco MDS NX-OS Release 4.2(1), software configuration information is available in new feature-specific
configuration guides for the following information:
• System management
• Interfaces
• Fabric
• Quality of service
• Security
• IP services
• High availability and redundancy
The information in these new guides previously existed in the Cisco MDS 9000 Family CLI Configuration
Guide and in the Cisco MDS 9000 Family Fabric Manager Configuration Guide. Those configuration guides
remain available on Cisco.com and should be used for all software releases prior to MDS NX-OS Release
4.2(1). Each guide addresses the features introduced in or available in a particular release. Select and view
the configuration guide that pertains to the software installed in your switch.
To find additional information about Cisco NX-OS Release 6.2, see
Notes.
This table summarizes the new and changed features for the
Configuration
OL-29291-02
New and Changed Information, page 1
Guide, and tells you where they are documented.
C H A P T E R
Guide. The latest version of this document is available at the
Cisco MDS 9000 Family NX-OS Release
Cisco MDS 9000 Family NX-OS Fundamentals
Cisco MDS 9000 Family NX-OS Fundamentals Configuration Guide
1
Cisco MDS 9000
1