Managing Ssms And Supervisor Modules; Configuring Ssm And Msm Global Upgrade Delay - Cisco MDS 9000 Series Configuration Manual

Managing SSMs and Supervisor Modules

4 2.1(2)
5 2.1(2)
6 2.1(2)
Mod Application Image Description
-------- -----------------------------
4 SSI linecard image
Mod MAC-Address(es)
--- --------------------------------------
4 00-05-30-00-9e-b2 to 00-05-30-00-9e-b6
5 00-0e-38-c6-2c-6c to 00-0e-38-c6-2c-70
6 00-0f-34-94-4d-34 to 00-0f-34-94-4d-38
* this terminal session
Managing SSMs and Supervisor Modules
This section describes the guidelines for replacing SSMs and supervisor modules and for upgrading and
downgrading Cisco MDS NX-OS and SAN-OS releases.

Configuring SSM and MSM Global Upgrade Delay

When there are multiple SSMs or MSMs in the same chassis, you can set the amount of time to delay between
upgrading the SSMs or MSMs in a rolling SSI upgrade.
SUMMARY STEPS
1. configure terminal
2. [no] ssm upgrade delay seconds
3. (Optional) copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1 configure terminal
Example:
switch# configure terminal
switch(config)#
Cisco MDS 9000 Family NX-OS Fundamentals Configuration Guide
190
0.30 20:c1:00:05:30:00:06:de to 20:e0:00:05:30:00:06:de
4.0 --
4.0 --
Application Image Version
-------------------------
4.1(1b)
Serial-Num
----------
JAB06480590
JAB082504MQ
JAB083407D3
Purpose
Enters global configuration mode.
Managing Modules
OL-29291-02