Sending A Message To Users; Enabling Or Disabling A Telnet Server Connection - Cisco MDS 9000 Series Configuration Manual

Basic Device Management
SUMMARY STEPS
1. show users
DETAILED STEPS
Command or Action
Step 1 show users
Example:
switch# show users

Sending a Message to Users

You can send a message to active users currently using the device CLI.
SUMMARY STEPS
1. (Optional) show users
2. send [session line] message-text
DETAILED STEPS
Command or Action
Step 1
show users
Example:
switch# show users
Step 2 send [session line] message-text
Example:
switch# send Reloading the device is 10
minutes!

Enabling or Disabling a Telnet Server Connection

You can enable or disable the Telnet server connection.
OL-29291-02
Purpose
Displays the user sessions.
Purpose
(Optional)
Displays the active user sessions.
Sends a message to all active users or to a specific user. The
message can be up to 80 alphanumeric characters and is case
sensitive.
Cisco MDS 9000 Family NX-OS Fundamentals Configuration Guide
Sending a Message to Users
95