Displaying Power Usage Information - Cisco MDS 9000 Series Configuration Manual

Displaying Power Usage Information

H/W Version
Mfg Bits
Engineer Use
snmpOID
Power Consump
RMA Code
Chassis specific block:
...
If you are installing a new license, use the show license host-id command to obtain the switch serial
Note
number. For more information, see the
Displaying Power Usage Information
Use the show environment power command to display the actual power usage information for the entire
switch. In response to this command, power supply capacity and consumption information is displayed for
each module.
In a Cisco MDS 9500 Series switch, power usage is reserved for both supervisors regardless of whether
Note
one or both supervisor modules are present.
switch# show environment power
-----------------------------------------------------
PS
-----------------------------------------------------
1
2
Mod Model
--- -------------------
1
4
5
6
9
Power Usage Summary:
--------------------
Power Supply redundancy mode:
Total Power Capacity
Power reserved for Supervisor(s)[-]
Power reserved for Fan Module(s) [-]
Power currently used by Modules[-]
Total Power Available
Cisco MDS 9000 Family NX-OS Fundamentals Configuration Guide
144
: 0.1
: 0
: 0
: 9.12.3.1.4.26.0.0
: 0
: 0-0-0-0
Model Power
(Watts)
DS-CAC-2500W 1153.32
WS-CAC-2500W 1153.32
Power
Requested Requested
(Watts)
-------
DS-X9032 199.92
DS-X9032 199.92
DS-X9530-SF1-K9 126.00
DS-X9530-SF1-K9 126.00
DS-X9016 220.08
Cisco MDS 9000 Family NX-OS Software Licensing
Power Status
(Amp @42V)
27.46 ok
27.46 ok
Power Power
Allocated Allocated
(Amp @42V) (Watts)
---------- --------- ----------
4.76 199.92
4.76 199.92
3.00 126.00
3.00 126.00
5.24 220.08
redundant
1153.32
252.00
0.00
619.92
-------
281.40
-------
Managing System Hardware
Guide.
Power Status
(Amp @42V)
----------
4.76 powered-up
4.76 powered-up
3.00 powered-up
3.00 powered-up
5.24 powered-up
W
W
W
W
W
OL-29291-02