Cisco MDS 9000 Series Configuration Manual page 197

Managing Modules
...
switch(standby)# dir slot0:
12288 Jan 01 00:01:06 1980 lost+found/
14765056 Mar 21 15:35:06 2005 m9500-sf1ek9-kickstart-mz.2.1.1.bin
15944704 Apr 06 16:46:04 2005 m9500-sf1ek9-kickstart-mz.2.1.1a.bin
48063243 Mar 21 15:34:46 2005 m9500-sf1ek9-mz.2.1.1.bin
48036239 Apr 06 16:45:41 2005 m9500-sf1ek9-mz.2.1.1a.bin
Usage for slot0:
141066240 bytes used
43493376 bytes free
184559616 bytes total
switch(standby)# exit
switch#
3 If there is not enough space, delete unneeded files.
switch# delete bootflash:m9500-sf1ek9-kickstart-mz.2.1.1.bin
The show module command output shows that the standby supervisor is in slot 6. Use the attach command to access
the supervisor module.
switch# attach module 6
switch(standby)# delete bootflash:m9500-sf1ek9-kickstart-mz.2.1.1.bin
switch(standby)# exit
switch#
4 Copy the EPLD image file from the FTP server to the bootflash: or slot0: device in the active supervisor module.
The following example shows how to copy to bootflash:
switch# copy ftp://10.1.7.2/m9000-epld-2.1.2.img bootflash:m9000-epld-2.1.2.img
he system will automatically synchronize the ELPD image to the standby supervisor if automatic copying
Note
is enabled.
switch# configure terminal
switch(config)# boot auto-copy
Step 6 Use the install module number epld url command on the active supervisor module to upgrade EPLD images for a
module.
switch# install module 2 epld bootflash:m9000-epld-2.1.2.img
EPLD
-------------------------------------------------------
XBUS IO
UD Flow Control
PCI ASIC I/F
PCI Bridge
WARNING: Upgrade process could take upto 15 minutes.
OL-29291-02
Curr Ver New Ver
0x07 0x07
0x05 0x05
0x05 0x05
0x05 0x07
Cisco MDS 9000 Family NX-OS Fundamentals Configuration Guide
Upgrading EPLD Images
179