Configuring The Time Zone - Cisco MDS 9000 Series Configuration Manual

Basic Device Management
• Maximum of 40 lines
SUMMARY STEPS
1. configure terminal
2. banner motd delimiting-character message delimiting-character
3. exit
4. (Optional) show banner motd
5. (Optional) copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2 banner motd delimiting-character message
delimiting-character
Example:
switch(config)# banner motd #Welcome to the
Switch#
switch(config)#
Step 3
exit
Example:
switch(config)# exit
switch#
Step 4 show banner motd
Example:
switch# show banner motd
Step 5
copy running-config startup-config
Example:
switch# copy running-config startup-config

Configuring the Time Zone

You can configure the time zone to offset the device clock time from UTC.
OL-29291-02
Purpose
Enters global configuration mode.
Configures the MOTD banner. Do not use the
delimiting-character in the message text.
Do not use " or % as a delimiting
Note
character.
Exits global configuration mode.
(Optional)
Displays the configured MOTD banner.
(Optional)
Copies the running configuration to the startup
configuration.
Cisco MDS 9000 Family NX-OS Fundamentals Configuration Guide
Configuring the Time Zone
91