Cisco MDS 9000 Series Configuration Manual page 213
Hide thumbs
Also See for MDS 9000 Series:
- Command reference manual (1464 pages) ,
- Configuration manual (344 pages) ,
- Troubleshooting manual (161 pages)
Table of Contents
Advertisement
Managing Modules
This table lists the default settings for the SSM.
Table 32: Default Supervisor Module Settings
Parameter
Initial state when installed
OL-29291-02
Default
• Power-down state on switches with Cisco MDS
SAN-OS Release 2.1(1a) and earlier installed.
• Fibre Channel switching mode on switches with
Cisco MDS SAN-OS Release 2.1(2) and NX-OS
Release 4.1(1b), or later installed and SSMs
with EPLD version 2.0(2) and later installed.
Cisco MDS 9000 Family NX-OS Fundamentals Configuration Guide
Default Settings
195
Advertisement
Table of Contents
