Configuring The Power Supply Mode - Cisco MDS 9000 Series Configuration Manual

Configuring the Power Supply Mode

Configuring the Power Supply Mode
You can configure power supply modes.
SUMMARY STEPS
1. configure terminal
2. power redundancy-mode {combined | insrc-redundant | ps-redundant |redundant}
3. (Optional) show environment power
4. (Optional) copy running-config startup-config
Cisco MDS 9000 Family NX-OS Fundamentals Configuration Guide
148
Table 21: Combined Mode Power Supply Scenarios
Scenario Power Current Mode
Supply 1
(W)
1 2500 combined
2500 N/A
2 2500 combined
2500 N/A
3 2500 combined
2500 N/A
Current Usage Power
(W) Supply 2 (W)
2000 1800
2000 1800
2000 2200
2000 2200
3000 1800
3000 1800
Managing System Hardware
New New Action
Mode Capacity Taken by
Switch
N/A 3600 This is
the
existing
configuration.
redundant 2500 Power
supply 2
is shut
down.
N/A 4400 This is
the
existing
configuration
redundant 2200 The new
capacity
is
changed.
N/A 3600 This is
the
existing
configuration
redundant N/A Rejected,
so the
mode
reverts to
combined
mode.
OL-29291-02