Verifying The Device Configuration - Cisco MDS 9000 Series Configuration Manual

Verifying the Device Configuration

SUMMARY STEPS
1. configure terminal
2. [no] feature telnet
3. (Optional) show telnet server
4. (Optional) copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2 [no] feature telnet
Example:
switch(config)# feature telnet
Step 3
show telnet server
Example:
switch(config)# show telnet server
Step 4 copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config
Verifying the Device Configuration
To verify the configuration after bootstrapping the device using POAP, use one of the following commands:
Command
show running-config
show startup-config
For detailed information about the fields in the output from these commands, see the Cisco Nexus command
reference for your device.
Cisco MDS 9000 Family NX-OS Fundamentals Configuration Guide
96
Purpose
Enters global configuration mode.
Enables the Telnet server connection. Use the no form of
the command to disable the Telnet server connection. The
default is disabled.
(Optional)
Displays the Telnet server configuration.
(Optional)
Copies the running configuration to the starutup
configuration.
Purpose
Displays the running configuration.
Displays the startup configuration.
Basic Device Management
OL-29291-02