About Crossbar Management - Cisco MDS 9000 Series Configuration Manual

Managing System Hardware
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2 power redundancy-mode {combined | insrc-redundant |
ps-redundant |redundant}
Example:
switch(config)# power redundancy-mode combined
Step 3
show environment power
Example:
switch(config)# show environment power
Step 4 copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config

About Crossbar Management

Cisco MDS NX-OS software supports three types of hardware for the Cisco MDS 9500 Series Directors:
Generation 1, Generation 2, and Generation 3.
Generation 3 includes the following:
• 48-port 8-Gbps Fibre Channel switching module
• 24-port 8-Gbps Fibre Channel switching module
• 4/44-port 8-Gbps Host-Optimized Fibre Channel module
• Cisco MDS 9513 Fabric-2 Crossbar Switching module
Note The new software features in Cisco MDS NX-OS Release 4.1(1b) and later are not supported in the
Generation 1 hardware.
OL-29291-02
Purpose
Enters global configuration mode.
Configures the power supply mode. The default is
redundant.
(Optional)
Displays the power mode configuration.
(Optional)
Copies the running configuration to the startup
configuration.
Cisco MDS 9000 Family NX-OS Fundamentals Configuration Guide
About Crossbar Management
149