Sending A Message To Users; Verifying The Device Configuration - Cisco Nexus 5500 Series Configuration Manual

Basic Device Management
DETAILED STEPS
Command or Action
Step 1
show users
Example:
switch# show users

Sending a Message to Users

You can send a message to active users currently using the device CLI.
SUMMARY STEPS
1. (Optional) show users
2. send [session line] message-text
DETAILED STEPS
Command or Action
Step 1 show users
Example:
switch# show users
Step 2 send [session line] message-text
Example:
switch# send Reloading the device is 10
minutes!

Verifying the Device Configuration

To verify the configuration after bootstrapping the device using POAP, use one of the following commands:
Command
show running-config
show startup-config
OL-30890-01
Purpose
(Optional)
Displays the active user sessions.
Sends a message to all active users or to a specific user. The
message can be up to 80 alphanumeric characters and is case
sensitive.
Purpose
Displays the running configuration.
Displays the startup configuration.
Cisco Nexus 5500 Series NX-OS Fundamentals Configuration Guide, Release 7.x
Sending a Message to Users
Purpose
Displays the user sessions.
103