Managing Users
Managing Users
You can display information about users logged into the device and send messages to those users.
Displaying Information about the User Sessions
You can display information about the user session on the device.
Procedure
Step 1
Sending a Message to Users
You can send a message to active users currently using the device CLI.
Procedure
Step 1
Step 2
Verifying the Device Configuration
To verify the configuration after bootstrapping the device using POAP, use one of the following commands:
Command
show running-config
Cisco Nexus 9000 Series NX-OS Fundamentals Configuration Guide, Release 7.x
94
Command or Action
show users
Example:
switch# show users
Command or Action
show users
Example:
switch# show users
send [session line] message-text
Example:
switch# send Reloading the device is
10 minutes!
Purpose
Displays the user sessions.
Purpose
(Optional)
Displays the active user sessions.
Sends a message to all active users or to a specific
user. The message can be up to 80 alphanumeric
characters and is case sensitive.
Purpose
Displays the running configuration.
Basic Device Management