C4Fm Digital Control; Dtmf (For Analog Fm Mode) - Yaesu DR-2X Operating Manual

C4FM DIGITAL CONTROL

• Requires the optional LAN Unit "LAN-01A".
• Set the operation mode to "AUTO" or "FIX DIGITAL".
• The transceivers compatible with the remote-control are the FTM-400D and FTM-100D.
• Remote control with C4FM digital can be done only when the transceiver DP-ID has been registered to the
DR-2X/DR-2XE in advance. Remote operation cannot be performed with a transceiver when the DP-ID has
not been registered, so you can securely manage repeaters.
• When the remote operation is accepted, the repeater responds and the operation completion is shown by
the respective functions on the screen of the mobile transceiver.

DTMF (for analog FM mode)

• Requires the optional voice guide unit "FVS-2".
• Set the operation mode to "AUTO".
• Any transceiver with DTMF can be used.
• When the remote operation is accepted, the CW ID of the operation that has been completed by the
respective function is transmitted on the repeater downlink frequency.
Remote Control Command List (Default setting)
Function
ACTIVATE
DEACTIVATE (LOCAL)
DEACTIVATE (ALL)
FIX DIGITAL
AUTO
HIGH TX POWER
MID TX POWER
LOW TX POWER
REC MESSAGE
PLAY MESSAGE
CLEAR MESSAGE
EMERGENCY CALL OFF
EMERGENCY CALL ON
ø1: It is only available with the C4FM digital.
ø2: When the C4FM digital mode, press the "PTT", "P2", or "P3" key.
When using Analog FM mode, hold down PTT, press the "" key on the microphone, and then enter the
DTMF code.
When remote control is activated by a Digital Code, the status is shown on the transceiver display.
When remote control is activated by DTMF, the status is responded with CW ID on the Downlink frequency.
DR-2X / DR-2XE Operating Manual
Description
Activate the repeater operation
of CH-A and CH-B.
Deactivate the local repeater
operation.
Deactivate all the linked repeat-
ers.
Set the repeater to C4FM mode.
Set the repeater to AMS (Auto-
matic Mode Select) mode.
Both analog FM and C4FM digi-
tal signals operate.
Set the transmit power to HI (50
W).
Set the transmit power to MD
(20 W).
Set the transmit power to LO (5
W).
Record the voice message.
Play (Stop) the voice message.
Clear the voice message.
When accessing the repeater
by a transceiver with registered
DP-ID, select the downlink from
all the linked repeaters or the
downlink in accordance with the
DG-ID setting.
C4FM Analog FM
Code
transceiver screen
1111 Activate Set
1111
2222 Local Deactivate Set
2222
1
2221 ø
- All Deactivate Set
3333  3333
DIGI/DIGI Set
4444  4444
AUTO/AUTO Set
0050  0050
High Power Set
0020  0020
Mid Power Set
0005  0005
Low Power Set
PTT 2  5555
ø REC Completed
2
P2  6666
ø PLAY Completed
2
P3 ø  7777 CLEAR Completed
1
8888
ø - EMERGENCY OFF
1
9999 ø - EMERGENCY ON
C4FM Analog FM
Display of the
CW ID
O
S
-
DD
AA
H
M
L
R
R
R
-
-
27