Setting The Dg-Id Number - Yaesu DR-2X Operating Manual

Setting the DG-ID Number

1 Touch [ A SETUP ] or [ B SETUP ] to display the frequency set up screen,
then touch [ F ] on the bottom of the screen.
2 Keep touching [ ID MODE ] (DG-ID).
The DG-ID list screen appears.
3 Touch [ LOCAL RPT ] .
The LOCAL RPT DG-ID screen appears.
4 Touch [ ▲ ] or [ ▼ ] to select the desired DG-ID number to be registered
to the DR-2X/DR-2XE repeater.
When using the DR-2X/DR-2XE as an Open Repeater that anyone may
use, set the DG-ID to "00".
[ Name ] twice.
5
Touch
The character input screen appears.
6 Input the name to be registered to the DR-2X/DR-2XE repeater.
Up to 10 characters may be input.
7 Touch [ ENT ] .
The input characters are registered and operation returns to the
LOCAL RPT DG-ID screen.
8 Touch [ BACK ] 4 times.
The screen returns to the operation mode screen.
DR-2X / DR-2XE Operating Manual
 8 4  
D G - I D
R - O FF
T - O F F
DG-ID LIST
0 0 M Y R P T
LOCAL RPT DG-ID
1
LOCAL RPT DG-ID
DG-ID 01 Down Link OWN
Name MY RPT
BACK
BACK
LOCAL RPT DG-ID
DG-ID 01 Down Link OWN
Name MY RPT
BACK BACK
NAME SET S A N - J O S E
Q
E
Caps
ABC
17