Setting The Digital Squelch Code; Setting The Id (Call Sign) - Yaesu DR-1 Operating Manual

Setting up the Repeater

Setting the digital squelch code

1
Touch [F] in the setup mode screen
The setup menu will appear.
2
Touch [DSQ CODE]
The menu list will appear.
3
Touch [▲] or [▼]
The set value will change each time it is touched.
Tips • Tone squelch codes between 001 and 126 or OFF can be selected.
• Factory default: OFF
4
Touch [BACK]
The setting is determined and the display will return to the setup menu.
The set value will be displayed below [DSQ CODE] on the menu.

Setting the ID (call sign)

1
Touch [F] in the setup mode screen
The setup menu will appear.
2
Touch [ID SET]
The character input screen will appear.
28