Default Id Setting; Register (Setting) Dg-Id Group - Yaesu DR-2X Operating Manual

Default ID Setting

1 Touch [ A SETUP ] or [ B SETUP ] to display the frequency set up screen,
then touch [ F ] on the bottom of the screen.
2 keep touching [ ID MODE ] (DG-ID).
The DG-ID LIST screen appears.
3 Touch [ Group ] twice.
The Group DG-ID setting screen appears.
4 Touching [ DG-ID ] switches between "gray" to "blue", then select "blue".
Gray: normal DG-ID
Blue: Default ID
5 Touch [ BACK ] .
The screen returns to the DG-ID list screen.
6 Touch [ BACK ] 3 times.
The screen returns to the operation mode screen.

Register (setting) DG-ID group

1 Touch [ A SETUP ] or [ B SETUP ] to display the frequency set up screen,
then touch [ F ] on the bottom of the screen.
2 keep touching [ ID MODE ] (DG-ID).
The DG-ID list screen appears.
3 Touch an unregistered [ Group DG-ID ] twice
The Group DG-ID setting screen appears.
4 Touch [ DG-ID ] .
The default DG-ID may be set in set Group DG-ID. Touch DG-ID to
change the Setting to default DG-ID, the blue screen, verify that DG-
ID is set to default DG-ID.
Touching [ DG-ID ] switches between "gray" and "blue", select "blue".
Gray: Normal DG-ID
Blue: Default DG-ID (TOT does not work on an uplink signal that includes
the same DG-ID)
5 Touch [ ▲ ] or [ ▼ ] to select the desired DG-ID number and register it to
the Group.
18
R - O FF
T - O F F
DG-ID LIST
LOCAL RPT
1
2
3
DG-ID
Registered DG-ID
Name
BACK
BACK
R - O FF
T - O F F
DG-ID LIST
LOCAL RPT
1
DG-ID
Registered DG-ID
Name
BACK
BACK
DR-2X / DR-2XE Operating Manual
 8 4  
D G - I D
0 1 S A N - J O S E
DG-ID
0 1 , 0 2 , 0 3 ,. . .
1 0 N O R T H - C A
2 0 S O U T H - C A
5 0 A L L - A R E A
D E L
Group 1 DG-ID
10 Down Link OWN
01,02,03,. ..
NORTH-CA
 8 4  
D G - I D
0 1 S A N - J O S E
DG-ID
Group 1 DG-ID
00 Down Link OWN