Remote Controls; Setting The Remote Control - Yaesu DR-2X Operating Manual

11. Remote Controls

Setting the remote control

• Remote control of the DR-2X/DR-2XE repeater can be performed in either C4FM digital mode or analog
FM mode. For C4FM digital mode, use the FTM-100D or FTM-400D transceiver. For security reasons,
we recommend using a mobile C4FM transceiver with the DP-ID that is registered to the DR-2X/DR-2XE
repeater.
• Remote operation sends commands on the uplink frequency of CH-B.
• When remote control is required, it is necessary to set whether to control the DR-2X/DR-2XE with analog
FM or C4FM in advance.
Selection of analog FM, C4FM digital
1
Touch [ A SETUP ] or [ B SETUP ] on the operation mode screen.
The setup mode screen will appear.
2 Touch [ F ] in the setup mode screen.
The setup menu will appear.
3 Touch [ MODE/REMOTE ] .
The menu list will appear.
4 [ COMMAND ] .
Select and
touch
The command list will appear.
5 Touch [ CONTROL MODE ] .
The set value will change in the following sequence each time [ CONTROL MODE ] is touched.
à "DTMF" (Analog FM) à "DIGITAL" (C4FM Digital) à
C O N T R O L M O D E
A C T I V A T E
D E A C T I V A T E ( L O C A L )
D E A C T I V A T E ( A L L )
F I X D I G I T A L
DIGITAL (C4FM Digital)
6 Touch [ BACK ] 4 times.
The screen returns to the operation mode screen.
26
D I G I T A L C O N T R O L M O D E
* 1 1 1 1 A C T I V A T E
* 2 2 2 2 D E A C T I V A T E
* 2 2 2 1 F I X D I G I T A L
* 3 3 3 3 A U T O
DR-2X / DR-2XE Operating Manual
 8
D G - I D
R - O FF
T - O F F
REMOTE/COMMAND/DISP TIMER
REMOTE
COMMAND
DISPLAY TIMER
V / M
BACK
BACK
D T M F
* 1 1 1 1
* 2 2 2 2
* 3 3 3 3
* 4 4 4 4
DTMF (Analog FM)
4  
OFF
>
ON